FAQ Moisture Monitoring in Buildings

SENZOMATIC is a continuous moisture monitoring system for buildings and construction assemblies. It helps detect excessive moisture, water ingress and conditions that may encourage mould growth early, allowing action to be taken before more serious damage occurs.

Sensors installed at critical points within the building continuously measure parameters such as wood moisture content, relative air humidity and temperature. SENZOMATIC evaluates the data and can alert users when potentially risky conditions are detected.

The system can help identify excessive wood moisture, water ingress into building assemblies, flat-roof leaks, condensation risks and conditions that may encourage mould growth. Continuous monitoring also makes it possible to follow how a problem develops over time.

SENZOMATIC can be used in single-family and multi-residential buildings, development projects, commercial and public buildings, hotels, historic buildings, and small or modular homes. It is particularly useful in areas where moisture damage may otherwise remain hidden for a long time.

Sensor placement is designed individually according to the building and its risk areas. Typical locations include the lower sections of walls, roofs, bathrooms, service installations, penetrations and other areas where water ingress or condensation is more likely to occur.

Yes. The exact installation options depend on the type of construction and access to the areas that need to be monitored. SENZOMATIC can therefore provide a project assessment and expert consultation before installation to determine suitable sensor locations.

Measured data is continuously evaluated. If the system detects unusual developments or potentially risky values, it helps users respond early and locate the affected area. Data can be accessed through SENZOMATIC’s digital interface.

SENZOMATIC monitors parameters associated with mould risk, particularly moisture and temperature. Long-term monitoring can identify conditions that may encourage mould growth so that the underlying cause can be addressed before the problem develops further.

Yes. SENZOMATIC can be used both during construction and throughout the long-term operation of a building. It helps developers, designers and construction companies document the condition of building assemblies, monitor risk areas and obtain long-term performance data.

A typical first step is a project assessment in which SENZOMATIC identifies critical areas and recommends suitable sensor locations. This can be followed by an expert consultation and a specific system proposal and quotation.